At present, there are many irregularities in laboratory design in China, which will bury hidden dangers for later use of the laboratory. Today’s article will expose the irregularities in laboratory design for everyone. Please keep your eyes open to see clearly.

Irregularities in laboratory design

Specifically, there are four irregularities in laboratory design in China, namely: incomplete planning, backward process requirements in civil engineering design, lack of standardized design, and lack of emphasis on adaptability research.

Irregularity 1: Incomplete planning

If the laboratory is not properly located, it will not only affect the surrounding environment, but also affect the laboratory building itself. Therefore, a comprehensive plan must be formulated before laboratory design, including laboratory design planning and construction planning.

Irregular phenomenon 2: backward process requirements of civil engineering design

Reflected in 2 aspects, 1 is that there is a big difference between the investment and area restrictions of the approval unit and the actual use, and 2 is that the designer does not have a comprehensive understanding and knowledge of the laboratory scientific research process. Among them, the former will seriously affect the scientific research process of the laboratory, and the latter will affect the daily use of the laboratory.

Irregularity 3: Lack of standardized design

As far as laboratory design is concerned, although the country has issued the "Design and Construction of Inspection and Testing Laboratory" standard, its implementation and implementation are not as simple as imagined. After all, the laboratory is a complex building. In addition to the experimental function, it also has the functions of research, office, small-scale production and R&D, and different industries have different requirements for the civil construction and equipment of the laboratory.

The laboratory design must be suitable for two, 1 is suitable for its work characteristics, 2 is suitable for its technical requirements. Specifically, its design and construction standards are higher than ordinary functional buildings, and the construction process requires more requirements. Professional and technical personnel are required to conduct a lot of analysis and summary before decoration to obtain the most suitable design plan.

Irregularity 4: Not paying attention to adaptive research

Data shows that only 32% of domestic laboratories remain unchanged after renovation. Many laboratories will be rebuilt in the later stage, and 20% of laboratories have been rebuilt more than 5 times, most of which do not pay attention to adaptability research. Caused.

It can be seen that before laboratory design, it is necessary to do a good job of adaptability research, improve the quality of decoration, adopt advanced technology and equipment, and achieve specialization, commercialization, and serialization. At the same time, we must pay attention to the design in terms of safety, energy saving, and environmental protection to achieve sustainable development at the technical level.