With the emergence of the science and technology industrial park, not only the number of newly-built laboratories gradually increased, but the old laboratories are also in urgent need of transformation. But after this boom, the general problems of laboratory design are worthy of our careful discussion.

Four problems to be eliminated in laboratory design

Specifically, we must eliminate four problems when designing the laboratory, namely: incomplete planning, low requirements for civil engineering design and technology, lack of standardized design, and negligence of adaptive research.

Problem 1: Incomplete planning

The so-called incomplete planning is simply improper site selection, which causes the laboratory to interfere with the surrounding environment in the later use. Therefore, it is necessary to prepare in advance and develop a comprehensive laboratory design plan and construction plan.

Problem 2: Low civil design and process requirements

Let's first look at the civil design, which is reflected in the difference between the expected investment and the size of the area in actual use. Moreover, according to the investigation, many problems in the use of the laboratory are caused by factors such as improper building layout, inappropriate area arrangement, and low standards of supporting facilities.

Let's look at the process requirements. The specific manifestation is that the designer does not have a comprehensive understanding and cognition of the laboratory scientific research process, the designer lacks planning and construction knowledge, and does not understand the laboratory scientific research process, which will have a negative impact on the later use of the laboratory.

Problem 3: Lack of standardized design

Although the state has promulgated and implemented the "Design and Construction of Inspection and Testing Laboratories" standards in terms of general guidelines, there are many problems in its implementation and use. After all, different industries have different requirements for laboratory civil engineering, design and equipment. Moreover, the laboratory has complex functions. In addition to experimental functions, there are also research, office, and small-scale production R&D functions. It is indeed difficult to carry out a standardized design.

Generally speaking, laboratory design standards are significantly higher than general office buildings, and construction requirements are also stricter. Therefore, it is necessary for professional and technical personnel to conduct a lot of analysis and summary before decoration, so as to obtain the most suitable set of design plans.

Problem 4: Not paying attention to adaptive research

According to the survey, only 32% of the laboratories remained intact after the design and renovation, and the others were remodeled in later use, and the proportion of remodeling more than 5 times was as high as 20%. This aspect is caused by changes in the needs of enterprises, but more is caused by not paying attention to adaptive research.

It can be seen that the early adaptive research is very important. It is necessary to consider in advance what changes will occur in the laboratory and reserve relevant space in advance. At the same time, we must pay attention to the design in terms of safety, energy saving, and environmental protection to achieve sustainable development at the technical level.

The above are the four problems to be eliminated in laboratory design. Please keep your eyes open to see clearly.