Let us learn about common instrument and consumable standards in testing laboratories, laboratory safety instrument standards, and food laboratory standards. You may be able to use these standards in the future!

Common instrument and consumable standards in laboratories

1. GB21549-2008 Safety requirements for glass burners for laboratory glassware;

2. GB/T21784.2-2008 Laboratory Glassware Universal Density Meter Part 2: Test Method and Use;

3. GB/T21298-2007 laboratory glass test tube;

4. GB/T21297-2007 laboratory glass instrument interchangeable cone-shaped frosted joints;

5. GB/T11414-2007 laboratory glass bottles;

6. GB/T12804-2011 laboratory glass measuring cylinder;

7. GB/T12805-2011 Laboratory glass burette;

8. GB/T12806-2011 laboratory glass instrument single mark volumetric flask;

9. GB/T28211-2011 laboratory glass instrument filter funnel;

10. GB/T28212-2011 laboratory glass instrument condenser;

11.GB/T28213-2011 laboratory glassware petri dishes;

12. GB/T22362-2008 laboratory glass flask;

13.GB/T22067-2008 Laboratory glassware wide-mouth flask;

14.GB/T11165-2005 laboratory pH meter;

15. GB/T30431-2013 laboratory gas chromatograph;

16.GB4793.7-2008 Safety requirements for electrical equipment for measurement, control and laboratory use Part 7: Special requirements for laboratory centrifuges;

17.GB12803-1991 laboratory glassware: measuring cup;

18.GB12807-1991 laboratory glass equipment: indexing pipette;

19.GB12808-1991 laboratory glass equipment: single marking pipette;

20.GB21549-2008 Laboratory Glass Apparatus: Safety Requirements for Glass Burner;

21. GBT11414-2007 laboratory glass bottles;

22.GBT12804-2011 laboratory glass equipment: measuring cylinder;

23. GBT12805-2011 laboratory glass equipment: burette;

24. GBT12806-2011 laboratory glass equipment: single mark volumetric flask;

25. GB/T12807-1991 laboratory glass equipment: indexing pipette;

26.GB/T12808-1991 Laboratory glass equipment: single-marked pipette;

27. GBT12809-1991 Laboratory Glass Apparatus: Principles of Design and Structure of Glass Measuring Instruments;

28. GBT12810-1991 laboratory glass instruments: the capacity calibration and use methods of glass measuring instruments;

29. GBT14149-1993 laboratory glass equipment: interchangeable spherical frosted joints;

30. GBT15723-1995 laboratory glass equipment: dryer;

31. GBT15724-2008 laboratory glass equipment: beaker;

32. GBT15725.4-1995 laboratory glass equipment: two-necked, three-necked spherical round bottom flask;

33. GBT15725.6-1995 laboratory glass equipment: ground flask;

34. GBT21297-2007 laboratory glass equipment: interchangeable cone-shaped frosted joints;

35. GBT21298-2007 laboratory glass equipment: test tube.

Physical and chemical equipment

1. GBT1914-2007 chemical analysis filter paper;

2. GB24789-2009 General Rules for the Provision and Management of Water Measuring Instruments for Water Use Units;

3. GBT11007-2008 conductivity meter test method;

4. GBT11165-2005 laboratory pH meter;

5. GBT12519-2010 General technical conditions for analytical instruments;

6. GBT13743-1992 DC magnetoelectric galvanometer;

7. GBT13979-2008 mass spectrometer leak detector;

8.GBT16631-2008 General Principles of High Performance Liquid Chromatography;

9. The structure and calibration principle of GBT17764-2008 density meter;

10.GBT18809-2002 General Specification for Air Ion Meter;

11.GBT21186-2007 Fourier transform infrared spectrometer;

12. GBT21187-2007 atomic absorption spectrophotometer;

13. GBT21191-2007 atomic fluorescence spectrometer;

14.GBT21388-2008 vernier, belt meter and digital depth caliper;

15. GBT26792-2011 high performance liquid chromatograph;

16.GBT27500-2011 composite glass electrode for pH measurement;

17. GBT30099-2013 General technical conditions for laboratory centrifuges;

18.GBT30430-2013 gas chromatograph test standard chromatographic column;

19. GBT30431-2013 laboratory gas chromatograph;

20. GBT4946-2008 gas chromatography terminology;

21.GBT6040-2002 general rules of infrared spectroscopy analysis methods;

22. GBT6041-2002 General Rules of Mass Spectrometry Analysis Method;

23.GBT6315-2008 vernier, belt meter and digital display universal angle ruler;

24. GBT8322-2008 molecular absorption spectroscopy: terminology;

25.GBT9008-2007 liquid chromatography terminology: column chromatography and planar chromatography;

26. QBT1676-1992 manual fat meter.

Microorganism

1. GBT22056-2008 microscope, objective and eyepiece signs;

2. GBT22058-2008 microscope, the symbol of stereo microscope;

3. GBT22059-2008 microscope, magnification;

4. GBT2609-2006 microscope, objective lens;

5. GBT2985-2008 biological microscope;

6.GBT9246-2008 microscope, eyepiece;

7. GBT9247-2008 microscope, condenser;

8. QBT2296-1997 Petri dishes.

Balance

1. GBT25106-2010 torque balance;

2. GBT4167-2011 weight;

3. GBT4168-1992 non-automatic balance lever type balance;

4. QBT2087-1995 rack pan balance.

Laboratory safety

GB/T27476.1-2014 Testing Laboratory Safety　

Part 1: General Provisions

This part of GB/T27476 specifies general requirements for the safety of testing laboratories (hereinafter referred to as laboratories). This section applies to testing laboratories, calibration and scientific research laboratories can refer to use. This section applies to laboratories in fixed locations, and laboratories in other locations can be used by reference, but additional requirements may be required.

GB/T27476.2-2014 Testing Laboratory Safety　

Part 2: Electrical factors

This part of GB/T27476 specifies the safety requirements related to electrical factors in testing laboratories (hereinafter referred to as laboratories) to improve the electrical safety of laboratories, minimize personal injury and prevent property losses. This section applies to testing laboratories, calibration and scientific research laboratories can refer to use, this section applies to fixed places.

GB/T27476.3-2014 testing laboratory safety

Part 3: Mechanical factors

This part of GB/T27476 specifies the safety requirements of testing laboratories (hereinafter referred to as laboratories) related to mechanical factors. This section applies to testing laboratories, calibration and scientific research laboratories can refer to use. This section applies to laboratories in fixed locations, and laboratories in other locations can be used by reference, but additional requirements may be required.

GB/T27476.4-2014 Testing Laboratory Safety　

Part 4: Non-ionizing radiation factors

This part of GB/T27476 specifies the safety requirements related to non-ionizing radiation factors for testing laboratories (hereinafter referred to as laboratories). This section gives the limit requirements of non-ionizing radiation and makes detailed recommendations to prevent the harm caused by these radiations or other injuries caused by the use of these radiations.

GB/T27476.5-2014 Testing Laboratory Safety　

Part 5: Chemical factors

This part of GB/T27476 specifies the safety requirements related to chemical factors in testing laboratories (hereinafter referred to as laboratories). This section applies to testing laboratories, calibration and scientific research laboratories can refer to use. This part is applicable to laboratories in fixed places, and laboratories in other places can be used by reference, but may need to be added.

Good Laboratory Management Practice

GB/T32146.3-2015 Technical requirements for the design and construction of inspection and testing laboratories.

Food laboratory

This part of GB/T32146 specifies the technical requirements for the overall planning, functional design, architectural design, environmental facilities, safety protection and other aspects of food laboratory design and construction. This part is applicable to the design and construction of new, rebuilt and expanded food laboratories;

GB15193.2-2014 National Food Safety Standard Food Toxicology Laboratory Practice;

This standard replaces GB15193.2-2003 "Code of Practice for Food Toxicology Laboratory".

Compared with GB15193.2-2003, the main changes of this standard are as follows:

The name of the standard was revised to "National Food Safety Standard Food Toxicology Laboratory Operational Specification";

GB/T31190-2014 Laboratory Waste Chemical Collection Technical Specifications

This standard specifies the terms and definitions of laboratory waste chemicals, classification requirements for laboratory waste chemicals, general requirements, requirements for producers of laboratory waste chemicals, requirements for the collection, storage and safety of laboratory waste chemicals.

GB/T 29471-2012 General technical specifications for mobile food safety testing laboratories

This standard specifies the classification and code, requirements, test methods, inspection rules, signs, packaging, transportation and storage of mobile food safety testing laboratories. . . This standard applies to land-based mobile laboratories that can conduct food safety testing.

GB/T27411-2012 Common Uncertainty Evaluation Methods and Expressions in Testing Laboratories

This standard specifies four evaluation methods for the uncertainty of measurement results. This standard applies to the evaluation of measurement uncertainty in testing laboratories.

GB/T27407-2010 Laboratory quality control uses statistical quality assurance and control chart technology to evaluate and analyze the performance of measurement systems
This standard specifies the design and operation plan of the statistical quality control (SQC) program, which is used to continuously monitor the stability, precision and bias performance of the analytical measurement system under test.

GB/T27410-2010 Technical specifications for testing laboratories of toxic and hazardous substances in consumer products

This standard specifies the technical requirements to be met by laboratories for testing toxic and hazardous substances in consumer products, including key links such as personnel, facilities and environment, sample management, sample separation and preparation, equipment, testing methods and method confirmation.

GB/T24777-2009 Chemical physicochemical and its hazard testing laboratory safety requirements

This standard specifies the safety requirements for chemical physical and chemical and hazardous testing laboratories. This standard applies to chemical physical and chemical and its hazard testing laboratories.

GB/T23621-2009 Basic conditions of agricultural plant quarantine laboratory

This standard specifies the basic requirements for the staffing, inspection rooms, facilities, environmental conditions and equipment of agricultural plant quarantine laboratories at all levels. This standard applies to the construction of agricultural plant quarantine laboratories at all levels.

GB19489-2008 Laboratory Biosafety General Requirements

This standard replaces GB19489-2004 "General Requirements for Laboratory Biosafety". This standard specifies the basic requirements for the facilities, equipment and safety management of laboratories with different levels of biosafety protection.

GB/T 13868-2009 Sensory Analysis General Guidelines for the Establishment of Sensory Analysis Laboratory

This standard specifies the general conditions for the establishment of a sensory analysis laboratory, the layout of the laboratory area (inspection area, preparation area, office, etc.), as well as the construction requirements and expected results of different areas. The provisions of this standard do not specifically target a certain type of product inspection.

GB/T22272-2008 Good Laboratory Practice Suggested Documents Establish and manage files that comply with the principles of good laboratory practice

The purpose of this standard is to help test institutions to make their file management meet the requirements of the principles of good laboratory practice. This standard does not replace relevant requirements in national regulations and/or laws, such as the requirements for archive retention period.

GB/T22274.1-2008 Guidelines for Good Laboratory Practice Supervision Departments Part 1: Guidelines for Supervision Procedures for Good Laboratory Practice

GB/T22274 "Guidelines for Good Laboratory Practice Supervision Departments" is divided into 3 parts, this part is the first part of GB/T22274. This part of GB/T22274 stipulates the administrative management, confidentiality, personnel and training of the supervisory department in good laboratory practice, GLP compliance plan, test agency inspection and

Investigating the follow-up work and appeal procedures of the review, this section is applicable to GLP supervision departments established in my country.

GB/T22274.2-2008 Good Laboratory Practice Supervision Department Guide Part 2: Guidelines for Performing Laboratory Inspections and Research Audits

GB/T22274 "Guidelines for Good Laboratory Practice Supervision Departments" is divided into 3 parts. This part of

GB/T22274 specifies the inspection, inspection procedures, research audits, inspections, or completion of research audits of the supervision departments. This section applies to GLP supervision departments established in my country.

GB/T22274.3-2008 Good Laboratory Practice Supervision Department Guide Part 3: Guidelines for the Preparation of Good Laboratory Practice Inspection Reports

GB/T 22274 "Guidelines for Good Laboratory Practice Supervision Departments" is divided into 3 parts, this part is part 3 of GB/T 22274. This part is equivalent to adopting the Organization for Economic Cooperation and Development (OECD) Good Laboratory Practice (GLP) Principles and Conformity Supervision Series Document No. 9: "Guidelines for the Preparation of Good Laboratory Practice Inspection Reports" [OCDE/GD(95)114] . This part of

GB/T22274 specifies the requirements for inspection reports, other information and approvals under good laboratory practices. This part is applicable to GLP supervision departments established in my country.

GB/T22275.1-2008 Implementation Requirements for Good Laboratory Practice Part 1: Quality Assurance and Good Laboratory Practice

GB/T22275 "Requirements for the Implementation of Good Laboratory Practices" is divided into 7 parts. This part of GB/T22275 specifies the specific content and requirements of quality assurance activities under the GLP principle, including: the responsibilities of quality assurance personnel, quality assurance personnel and management Contacts, qualifications of quality assurance personnel and participation in the development of standard operating procedures and research plans, quality assurance inspections, quality assurance activities planning and demonstration of quality assurance activities and methods, quality assurance inspection reports, data and final This section applies to quality assurance activities under the GLP principles for the review of reports, quality assurance statements, quality assurance and non-regulatory research, and quality assurance in small test institutions.

GB/T22275.2-2008 Requirements for the Implementation of Good Laboratory Practice Part 2: Tasks and Responsibilities of the Project Leader in the Study of Good Laboratory Practice

GB/T22275 "Requirements for the Implementation of Good Laboratory Practices" is divided into 7 parts. This part of

GB/T22275 specifies the tasks, appointments, training, responsibilities, qualifications, and legal status of the project leader. In addition to the express exemption of national legislation, the GLP principles specified in this section apply to all non-clinical health and environmental safety research required by regulations, including: registration or registration of medicines, pesticides, food additives and feed additives, cosmetics, veterinary drugs and similar products Application for permits, and industrial chemical management.

GB/T22275.3-2008 Requirements for the Implementation of Good Laboratory Practice Part 3: Laboratory suppliers’ compliance with the principles of good laboratory practice.

GB/T22275 "Requirements for the Implementation of Good Laboratory Practices" is divided into 7 parts, this part is part 3 of GB/T22275. This part of GB/T22275 specifies the requirements of laboratory suppliers under the GLP principle, including the following aspects: standards and conformity assessment plans, test systems, animal feed, litter and water, radioactively labeled chemicals, computers System, application software, reference materials, instruments, sterile materials, conventional reagents, cleaning agents and disinfectants, products required for microbiological testing. This section applies to the requirements for laboratory suppliers under the GLP principle.

GB/T22275.4-2008 Requirements for the Implementation of Good Laboratory Practice Part 4: Application of Good Laboratory Practice Principles in Field Research

GB/T22275 "Requirements for the Implementation of Good Laboratory Practices" is divided into 7 parts, this part is part 4 of GB/T22275. This part of GB/T22275 specifies the organization and personnel, quality assurance plan, test facilities, instruments, raw materials, reagents, test systems, test samples and reference materials, standard operating procedures, report and record of research results And storage and retention of materials. In addition to the express exemption of national legislation, the principles of good laboratory practice (hereinafter referred to as GLP principles) stipulated in this section apply to all non-clinical health and environmental safety research required by regulations, including: medicines, pesticides, food additives and feed additives, Registration or application licenses for cosmetics, veterinary drugs and similar products, and industrial chemical management.

GB/T22275.5-2008 Requirements for the Implementation of Good Laboratory Practice Part 5: Application of Good Laboratory Practice Principles in Short-term Research

GB/T22275 "Requirements for the Implementation of Good Laboratory Practices" is divided into 7 parts, this part is part 5 of GB/T22275. This part of GB/T 22275 specifies the organization and personnel, quality assurance plans, facilities, test systems, test samples and reference objects, standard operating procedures, implementation of research, and report of research results for short-term research test institutions. Except for the express exemption of national legislation, the principles of good laboratory practice (hereinafter referred to as GLP principles) stipulated in this section apply to all non-clinical health and environmental safety research required by regulations, including: medicines, pesticides, food additives and feed additives, Registration or application licenses for cosmetics, veterinary drugs and similar products, and industrial chemical management.

GB/T22275.6-2008 Requirements for the Implementation of Good Laboratory Practice Part 6: Application of Good Laboratory Practice Principles in Computerized Systems

This part of GB/T22275 specifies the application and management of computerized systems under the GLP principle, including: the responsibilities of various departments, related training, equipment and instrument requirements, computerized system maintenance and disaster recovery, and data recording And processing, computerized system security, computerized system verification procedures, and documentation requirements for its development, verification, operation and maintenance. This section applies to the application of computerized systems under the GLP principle.

GB/T22275.7-2008 Requirements for the Implementation of Good Laboratory Practice Part 7: Application of the Principles of Good Laboratory Practice in the Organization and Management of Multi-site Research

This standard specifies the management and control of multi-site research, quality assurance, master schedule, research plan, research implementation, report of research results, standard operating procedures, storage and custody of records and materials. In addition to the express exemption of national legislation, the principles of good laboratory practice (hereinafter referred to as GLP principles) stipulated in this standard are applicable to all non-clinical health and environmental safety research required by regulations, including: medicines, pesticides, food additives and feed Registration or application license for additives, cosmetics, veterinary drugs and similar products, and industrial chemical management.
GB/T22278-2008 Principles of Good Laboratory Practice

This standard is equivalent to the adoption of the Organization for Economic Cooperation and Development (OECD) Good Laboratory Practice (GLP) principles and compliance supervision series document No. 1: "OECD GLP Principles" [ENV/MC/CHEM(98)17].

GB/T6682-2008 Analytical laboratory water specifications and test methods

This standard specifies the grades, specifications, sampling and storage, test methods and test reports of water used in analytical laboratories. This standard applies to test water for chemical analysis and inorganic trace analysis. Different levels of water can be selected according to actual work needs.

GB/T19495 Technical requirements for genetically modified products testing laboratories

This standard specifies the general technical requirements of genetically modified product testing laboratories and the basic requirements of inspection quality control. This section applies to laboratories that use nucleic acid amplification technology and immunological methods to detect genetically modified products, as well as laboratories in other related fields such as genetic engineering.